Summary: Statue Park is a logic puzzle where you place a set of shapes, usually the 12 pentominoes, in a grid so that no two shapes touch along an edge, every black dot is covered, every white dot stays empty, and all the empty cells stay connected. A well-made puzzle has exactly one solution and needs no guessing. Here are the rules, the first forced moves on a real board, and how the difficulty levels differ.
Want to make your own? The Statue Park puzzle generator creates Statue Park puzzles with answer keys, ready for print or play.
Overview
Picture a park with a set of statues to put up. Each statue is a shape made of squares, and the park is a square grid. Some cells carry a black dot (a statue must stand there) and some carry a white dot (that spot stays open). Your job is to place every statue so the park works: statues never touch side by side, and visitors can walk between every open cell. The puzzle is also published as Pentomino Park.

An Easy 8×8 puzzle as printed: the dots are the clues, and the shapes below the grid are the statues to place.
The Goal
Shade the cells of every shape in the bank so the finished grid obeys all the rules below. Each shape in the bank goes in once (a set that lists a shape twice places it twice), and you may turn it or flip it over. On paper, shade a statue’s cells and mark a cell you know is empty with a small dot, so you can watch the open park grow. When you are done, the shaded cells are the statues and every other cell is open park.
The Rules
- Place every shape. Each shape in the bank goes into the grid once, as one piece. You may rotate it or flip it.
- Shapes never touch along an edge. Two different shapes may meet at a corner, but never side by side.
- Black dots are covered. Every cell with a black dot is part of a shape.
- White dots stay empty. No shape covers a cell with a white dot.
- The empty cells connect. All the cells that are not part of a shape form one area: you can walk from any empty cell to any other through empty cells, stepping up, down, left or right (not diagonally).
The Shapes
The traditional set is the 12 pentominoes, every shape you can make from five squares, each named by the letter it looks like: F, I, L, N, P, T, U, V, W, X, Y and Z. Smaller grids use fewer shapes: the board above uses six of them (I, N, P, U, W and Y). The bank printed with the puzzle always shows exactly which shapes to place.
Some books use other sets: the five tetrominoes (four squares each: I, L, O, S and T), the tetrominoes twice over, or pentominoes and tetrominoes together. The rules do not change. When a set holds the same shape twice, place it twice.
How to Start Solving
You never need to guess. Start with these moves; the examples use the puzzle pictured above, counting rows from the top and columns from the left.
1. Dots that touch belong to the same shape. Two black dots side by side can never be in different shapes, because different shapes may not touch. So the three black dots in row 2, columns 1 to 3, are all part of one shape, and so are the black dots at row 5, columns 3 and 4, and row 6, column 3.
2. Count the cells. Six pentominoes cover 6 × 5 = 30 cells, so 34 of the 64 cells stay empty. Keep the count in mind as a check: when every statue is placed, exactly that many cells are shaded.
3. Find the shape with only one home. Pick a shape with few places to go (long or spiky shapes first) and ask where it can still fit. A placement fails if it covers a white dot, or if it runs alongside a black dot it does not cover (that dot’s shape would touch it). Try the straight I on this board. Rows 1, 6, 7 and 8 and column 4 are out at once: their white dots are spaced so that every line of five in them covers one. Most other lines run alongside a black dot they do not cover — row 4, columns 1 to 5, sits right under the black dot in row 3, column 4, and every line in column 2 ends up beside a black dot in row 2 or column 3. Check what is left and only one line survives: column 1, rows 4 to 8. Shade it.
4. Empty the cells around a placed shape. Nothing else may touch the I along an edge, so the cell above it (row 3, column 1) and the five cells to its right (column 2, rows 4 to 8) are empty. Mark them.
5. Look for cells every placement shares. Now ask the same question of the W, the staircase shape. With the I in place it fits in only three spots: stepping down from row 3, column 8 to row 5, column 6; stepping down from row 3, column 4 to row 5, column 6; and stepping down from row 4, column 5 to row 6, column 7. All three cover row 5, column 6. You do not yet know which spot is right, but that cell is shaded either way.
6. Empty what nothing can reach, and follow lonely dots. The same question works in reverse. A cell that no remaining placement of any shape can reach stays empty. And a black dot that only one shape can still reach must be covered by that shape, which narrows where that shape can go.
7. Keep the empty cells connected. Never let a shape wall off a pocket of empty cells from the rest of the park. If placing a shape somewhere would cut the empty cells in two, that placement is wrong. Edges and corners are where pockets form most easily: the white dot in the bottom-right corner (row 8, column 8) has only two neighbours, so no shape, or pair of shapes, may cover both of them.
Repeat these moves: each shaded or emptied cell narrows the places the remaining shapes can go. Because the solution is unique, a cell that still looks open both ways just means you have not yet found the move that decides it.

The same board solved: the I fills column 1, the six statues never touch side by side, and the open cells form one connected park.
Difficulty (and why there is no guessing)
Every Statue Park puzzle made in Puzzle Maker Pro has exactly one solution that you can reach by logic alone. The difficulty setting decides which moves you need:
- Easy solves with placement logic alone: moves 1 to 6 above, asking where each shape can still fit, shading what every remaining placement shares and emptying what none can reach. The board above is Easy.
- Medium also needs the connected-park rule, move 7: a shape that would cut the empty cells apart is in the wrong place, and a cell whose shading would split the park must stay empty.
- Hard adds one more step: place a shape in a spot you are unsure of, follow the moves it forces, and if a rule breaks, that spot is ruled out. It is a short logical check, not a guess.
Harder puzzles also usually print fewer black dots, so there is less to start from. Puzzle size is a separate choice: a small board with a few shapes is a quick solve at any level, and the full twelve-pentomino board is a longer one.
When the Statues Look Different
Some puzzle books colour each statue in the answer key, or put a little picture on it. The shapes in the bank then carry the same colour or picture, so you can match them up. The board, the dots and the rules are the same.

A 12×12 puzzle with all twelve pentominoes, solved, each statue in its own colour.

A tetromino version where each shape appears twice. Matching shapes still may not touch.
Outcome
You now know the five rules, how to read the dots and the shape bank, seven moves you can repeat until the last statue is in place, and what changes between Easy, Medium and Hard. Ready to make your own? See How to Create Statue Park Puzzles in Puzzle Maker Pro.
Try It Online
Solve a Statue Park puzzle in your browser: click a cell to shade it as part of a statue, click again to mark it as open park (or right-click to mark it straight away), and drag across cells to shade several at once. Dot cells are already set for you, the shapes you have placed grey out in the bank below the board, and a mistake, such as a statue too big for any shape or open cells cut off from the rest, is highlighted as you play. Press Check when you think you are done.
Play a Statue Park puzzle in your browser. New to online puzzles? See How to Play Puzzles Online.
FAQ
What is a Statue Park puzzle?
A logic puzzle where you place a set of shapes, usually the 12 pentominoes, in a grid. Shapes may not touch along an edge, black dots must be covered, white dots stay empty, and all the empty cells must connect.
How do you solve a Statue Park puzzle?
Start with the dots: touching black dots belong to the same shape. Then find a shape with only one place it can fit, empty the cells around it, shade cells every placement of a shape shares, empty cells no shape can reach, and never cut the empty cells apart.
Can two shapes touch at a corner?
Yes. Shapes may meet diagonally at a corner. They may not share an edge.
Can I rotate or flip the shapes?
Yes. Every shape may be turned and flipped. Only its form matters, so a mirrored N still counts as the N.
Is Statue Park the same as Pentomino Park?
Yes. Both names describe the same puzzle and the same five rules.
Does every Statue Park puzzle have only one solution?
Every one made in Puzzle Maker Pro does. The dots are chosen so exactly one arrangement of the shapes fits, and you can reach it by logic alone.
Further Reading
- How to Create Statue Park Puzzles in Puzzle Maker Pro
- How to Play Puzzles Online
- Puzzle Book Studio Tutorials
Make Your Own Statue Park Puzzles
Now that you know how the statues fit, make your own: Easy to Hard, from a quick 7×7 board to the full twelve-pentomino park, each with its answer key, ready for a puzzle book or a printable worksheet.
Create your own Statue Park puzzles with Puzzle Maker Pro Statue Park
Not ready yet? Try the free demo first — it covers every module.

